Servicing the ZS3-2 Controller
Capacity CPU 0 CPU 1
D1, D3, D4, D6 (white) D1, D3, D4, D6 (white)
The ZS3-2 controller replaceable memory components and part numbers are listed below.
TABLE 25
ZS3-2 Controller Replaceable Memory Components
Component Description FRU/CRU Part Number
CPU Intel E5-2658, 2.1G, 8-
core
FRU 7019701
Memory DIMM, 16GB,DDR3,
1600,2Rx4,1.35V
CRU 7041603
Memory DIMM, 32GB,DDR3,
1066,4Rx4,1.35V
CRU 7055964
ZS3-2 NIC/HBA Options
The following table describes the NIC/HBA options for the ZS3-2 controller. See “ZS3-2 PCIe
Options” on page 123 for slot allocations.
TABLE 26
ZS3-2 Controller NIC/HBA Options
Mktg Part Number Description
SG-SAS6-INT-Z 8-port 6Gb/s SAS-2 internal HBA
SG-XPCIE2FC-QF8-Z 2-port 8Gb FC HBA
7103791 4-port (4x4) SAS-2 6Gb/s external HBA
7101674 2-port 16Gb FC HBA
X1109A-Z 2-port 10GbE SFP+ NIC
X4242A 2-port InfiniBand CX2 HCA
7100477 4-port 1Gb Ethernet Copper UTP NIC
7100488 2-port 10Gb Ethernet Copper Base-T NIC
X2129A XCVR 850NM, 1/10GPS, SFP, short reach
X5562A-Z 10GbE/1GbE SFP+ Transceiver, long reach
ZS3-2 PCIe Riser Configuration
The three risers are labeled Riser 1, Riser 2, and Riser 3. Though similar, the risers are not
interchangeable. Riser 1 installs at the left rear of the chassis, Riser 2 at the center rear, and
Riser 3 at the right rear of the chassis. Each riser can accommodate two PCIe cards:
122 Oracle ZFS Storage Appliance Customer Service Manual • February 2016