How to Locate a Failed Component (CLI)
Alert Log Entries
This is the appliance alert log, recording key events of interest during appliance operation.
The following are example alert log entries as they would appear in the BUI:
TABLE 10
Example BUI Alert Log Entry Displays
Time Event ID Description Type
2013-9-16 13:01:56
f18bbad1-8084-4cab-
c950-82ef5b8228ea
An I/O path from slot
'PCIe 0' to chassis 'JBOD
#1' has been removed.
Major alert
2013-9-16 13:01:51
8fb8688c-08f2-c994-
a6a5-ac6e755e53bb
A disk has been inserted
into slot 'HDD 4' of chassis
'JBOD #1'.
Minor alert
2013-9-16 13:01:51
446654fc-b898-6da5-
e87e-8d23ff12d5d0
A disk has been inserted
into slot 'HDD 15' of
chassis 'JBOD #1'.
Minor alert
An information icon next to the Event ID means that extended information is available.
Click the icon to display information below the list of alerts.
The appliance can also be configured to send email, raise an SNMP trap, or perform other
actions when particular alerts occur. This is configured in the Alerts section. All alerts appear
in this log, regardless of whether they have actions configured for them. For more information
about alerts, see “Configuring Alerts” in Oracle ZFS Storage Appliance Administration Guide,
Release 2013.1.5.0.
Fault Log Entries
The fault log records hardware and software faults. This is a useful reference when
troubleshooting hardware failure, as timestamps are available for these hardware fault events.
The following are example fault log entries as they would appear in the BUI:
TABLE 11
Example BUI Fault Log Entry Displays
Date Event ID Description Type
2013-9-5 17:42:35 9e46fc0b-b1a4-4e69-f10f-
e7dbe80794fe
The device 'HDD 6' has
failed or could not be
opened.
Major Fault
Servicing the Hardware 31
To Next Page
Need help?
General