How to Import a Saved Configuration (CLI)
1.
Go to Maintenance > System.
2.
Click the add icon at the top of the saved configurations list and then use
your web browser's file selection dialog to locate the previously exported
configuration.
Note - You should upload the single, compressed archive file previously saved using the export
function.
How to Import a Saved Configuration (CLI)
Use the following procedure to import a saved configuration. You can also use the import
function to import a configuration stored in a share on the appliance itself, that has the HTTP or
FTP protocol enabled for reading. You can enter a username and password for authentication to
the remote server if one is required.
To import a saved configuration, use the following CLI command and specify the
universal unique identifier for the backup:
host:maintenance system configs> import cb2f005f-cf2b-608f-90db-fc7a0503db2a
How to List Configurations (CLI)
Use the following procedure to list configurations.
To list configurations, use the following CLI command:
host:maintenance system configs> list
CONFIG DATE SYSTEM VERSION
bfa614d7-1db5-655b-cba5-bd0bb0a1efc4 2009-8-5 17:14:28 host 2009.08.04,1-0
cb2f005f-cf2b-608f-90db-fc7a0503db2a 2009-8-24 17:56:53 host 2009.08.18,1-0
Working with Software Notifications and Updates
You can set up periodic checks for software updates, or you can check for updates at any time.
When an updated software package is available, you are directed to download the latest package
280 Oracle ZFS Storage Appliance Customer Service Manual • February 2016
To Next Page
Loading...
Need help?
General