Polaris 2013 RANGER RZR S User Manual

8.18
TRANSMISSION
9924125 - 2013 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2012 Polaris Sales Inc.
12. With the transmission in neutral, lubricate and install
thrust washer, drum gear, plate, springs, contact pins
and gear position sensor/O-ring assembly. Verify the
contact pins are aligned as shown with transmission
in neutral. Torque retaining screws to specification.
13. Complete the shift detent screw installation. Torque
th
e outer detent screws to specification.
14. Install reverse idler lower washer, needle bearing,
gea
r, upper washer and retaining ring onto idler shaft.
15. Install a new shaft bearing (if required).
16. Install the park flange and torque the (5) screws to
s
pecification.
=
Apply Lubricant to shift drum components.
= T
Gear Position Sensor Screws:
25-40 in-lbs (3-5 Nm)
= T
Outer Detent Screws:
23-27 ft-lbs (31-37 Nm)
Neutral
= T
Park Flange Screws:
130-155 in-lbs (15-18 Nm)
PRELIMINARY VERSION

Polaris 2013 RANGER RZR S Specifications

General

Brand	Polaris
Model	2013 RANGER RZR S
Category	Offroad Vehicle
Language	English