Qlogic 8100 Series User Manual

5–Installation in a VMware Environment
Configuring a Hard Drive in a Virtual Machine
5-20 FE0254601-00 A
7. Select a device. In this example, select Hard Drive to add a storage device
to the virtual machine, and then click Next (Figure 5-22).
Figure 5-22. Add Hardware—Device Type
8. Select the type of disk. Click Raw Device Mappings, and then click Next.
(Figure 5-23). For an explanation of the virtual disk options, refer to your
VMware documentation.
Figure 5-23. Add Hardware—Select a Disk

Qlogic 8100 Series Specifications

General

Brand	Qlogic
Model	8100 Series
Category	Network Card
Language	English