7–Configuring FCoE in a Windows Environment
N_Port ID Virtualization
FE0254601-00 A 7-11
Figure 7-4. Select Virtual Ports to Delete
5. Click the Delete button, located at the bottom of the screen. A dialog box
prompts you for a password.
6. Type the administrative password, and then click OK. A dialog box appears,
asking if you want to refresh the host view.
7. Click OK to refresh the host immediately or click Cancel if you want to
refresh the view at a later time.
Verifying Deletion of Virtual Ports
Use QConvergeConsole GUI to verify that the virtual adapter port has been
deleted:
1. Verify that the deleted vPort number no longer appears beneath the FCoE
port selected when deleting the virtual ports.
2. Verify that the vPort is no longer logged into the connected NPIV-enabled
FCoE switch by checking its Fibre Channel name server database. Refer to
the corresponding switch documentation for details.
To Next Page
Loading...
Need help?
General