Qlogic 8100 Series User Manual

3–Installation in a Windows Environment
Installing Software
FE0254601-00 A 3-13
7. The Hardware Update Wizard starts. Select No, not this time, and then
click Next (Figure 3-11).
Figure 3-11. Starting the Hardware Update Wizard
8. Select Install from a list or specific location (Advanced), and then click
Next.
9. Click Have Disk, and then navigate to the folder containing the extracted
QLogic NIC driver that you downloaded in “Downloading QLogic Drivers” on
page 3-2.
10. Select the setup information file (qlge.inf) from the list of QLogic NIC
driver files, and then click Open.
11. When the Hardware Update Wizard/Select a Device Driver dialog box
opens, click Next.

Qlogic 8100 Series Specifications

General

Brand	Qlogic
Model	8100 Series
Category	Network Card
Language	English