Qlogic 8100 Series User Manual

9–Offline Utilities
Fast!UTIL
9-2 FE0254601-00 A
The QLogic Flash programming utility is a DOS utility with command line options.
Fast!UTIL
The Fast!UTIL utility is for offline QLogic 8100 Series Adapters that are installed
on BIOS servers. Fast!UTIL performs the following tasks:
 Configures general and advanced adapter settings, selects boot devices,
restores default adapter settings, and displays raw NVRAM data.
 Displays information about Fibre Channel devices connected to the adapter.
 Verifies disk data and performs low-level disk formatting.
 Verifies adapter transmit and receives functions.
Starting Fast!UTIL
To start the Fast!UTIL utility, press CTRL+Q or ALT+Q during the BIOS
initialization after the QLogic 8100 Series Adapter BIOS banner is displayed
(Figure 9-1).
Figure 9-1. Fast!UTIL Startup

Qlogic 8100 Series Specifications

General

Brand	Qlogic
Model	8100 Series
Category	Network Card
Language	English