9–Offline Utilities
Fast!UTIL
9-10 FE0254601-00 A
Scan Fibre Channel Devices
The Scan Fibre Channel Devices option displays information for all devices on the
Fibre Channel loop. This information is useful when configuring the adapter and
attached devices and includes the loop ID, vendor name, product name, and
revision. You can also use this option to confirm that the adapter FCoE function is
operating in the fabric.
EV Controller Order Enables or disables loading the adapter BIOS if the Con-
verged Network Adapter is selected as the first controller in
the system BIOS\boot controller order. If this parameter is dis-
abled, the adapter BIOS loads in any CMOS location, allow-
ing the system to boot from a Fibre Channel drive (boot LUN),
even after other devices, such as a 3.5-inch disk or CD-ROM
drive. The default is disabled. This parameter is primarily for
compatibility with legacy servers.
Primary FCF VLAN ID Enables or disables the use of the primary VLAN ID.
Table 9-3. Advanced Settings Window Parameters (Continued)
Parameter Description
To Next Page
Loading...
Need help?
General