8–Configuring FCoE in a Linux Environment
Using the QLogic Linux Utilities
FE0254601-00 A 8-47
Package Contents
Table 8-15 describes the files in the HBA Collect utility package.
Using the Utility
To create a compressed file containing debugging and configuration options,
issue the following command:
# ./ql-hba-collect.sh
Figure 8-20 shows an example of the execution sequence.
Figure 8-20. HBA Collect Utility Execution Example
Table 8-15. HBA Collect Utility Package Files
File Description
COPYING GNU general public license that describes rights to
copy, distribute, and use the open source content in
this Linux tool.
ql-hba-collect.sh Script file that gathers diagnostic information for
troubleshooting on the RHEL 5 host
ql-hba-snapshot-x.xx/ FC HBA Snapshot utility
README.ql-hba-collect.txt Readme file
revision-qlhbacollect.txt Text file that explains the changes that are new in
this version of the package.
To Next Page
Loading...
Need help?
General