Qlogic 8100 Series User Manual

8–Configuring FCoE in a Linux Environment
Configuring FCoE Parameters Using QLogic Utilities
FE0254601-00 A 8-15
Table 8-6. sysfs FCoE Driver Parameters and File Locations
Sysfs Location Parameters Description
/sys/mod-
ule/qla2xxx/parame-
ters
ql2xallocfwdump
ql2xdevdiscgoldfw
ql2xenablemsix
ql2xetsenable
ql2xextended_error_logging
ql2xfdmienable
ql2xfwloadbin
ql2xloginretrycount
ql2xlogintimeout
ql2xmaxqdepth (w)
ql2xplogiabsentdevice (w)
ql2xqfullrampup (w)
ql2xqfulltracking (w)
qlport_down_retry (w)
Refer to “FCoE Driver Parameters for
Linux” on page 8-1.
/sys/class/fc_host/h
ostX/
device -> Link to the physical PCI device
fabric_name Fabric WWPN
issue_lip (wo) Force the port to issue a LIP
node_name Converged Network Adapter port WWNN
port_id Converged Network Adapter port ID
port_name Converged Network Adapter port WWPN
port_state Current port state (online, offline)
port_type Fibre Channel port type. For example:
F_Port
speed Current negotiated link speed
statistics Detailed Fibre Channel statistics

Qlogic 8100 Series Specifications

General

Brand	Qlogic
Model	8100 Series
Category	Network Card
Language	English