R&S RTC1000 User Manual

Serial Bus Analysis
R&S
®
RTC1000
153User Manual 1335.7352.02 ─ 02
Column Description
"Start Time" Time of frame start in relation to the trigger point
"ID" Frame identifier
"Length" Number of data bytes
"Data" Values of the data bytes
"Chks" Checksum value
"State"
Frame state:
●
"OK" = Frame is valid
●
"DATA" = during acquisition start/end only the frame start / frame end has been
decoded; currently no data available
●
"SYNC" = Synchronization error
●
"CHKS" = Checksum error
●
"PARI" = Parity error
●
"WAKEUP" = Wakeup frame
●
"INS" = the last frame is not contained in the acquisition. The frame end was not
decoded.
LIN Bus (Option R&S RTC-K3)

R&S RTC1000 Specifications

General

Brand	R&S
Model	RTC1000
Category	Test Equipment
Language	English