R&S RTC1000 User Manual

Remote Commands Reference
R&S
®
RTC1000
302User Manual 1335.7352.02 ─ 02
BUS<b>:CAN:FRAMe<n>:IDSTate?................................................................................ 305
BUS<b>:CAN:FRAMe<n>:ACKValue?............................................................................. 305
BUS<b>:CAN:FRAMe<n>:CSValue?............................................................................... 306
BUS<b>:CAN:FRAMe<n>:DLCValue?............................................................................. 306
BUS<b>:CAN:FRAMe<n>:IDTYpe?................................................................................. 306
BUS<b>:CAN:FRAMe<n>:IDValue?.................................................................................306
BUS<b>:CAN:FRAMe<n>:BSEPosition?.......................................................................... 307
BUS<b>:CAN:FRAMe<n>:BCOunt?.................................................................................307
BUS<b>:CAN:FRAMe<n>:BYTE<o>:STATe?................................................................... 307
BUS<b>:CAN:FRAMe<n>:BYTE<o>:VALue?................................................................... 308
BUS<b>:CAN:FCOunt?
Returns the number of received frames.
Suffix:
<b>
.
1, 2
Selects the bus.
Return values:
<FrameCount> Total number of decoded frames.
Usage: Query only
BUS<b>:CAN:FRAMe<n>:STATus?
Returns the overall state of the specified frame.
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame (1...n).
Return values:
<FrameStatus> OK | BTST | CRC | FORM | NACK | INSufficient
OK
Frame is valid.
BTST
Bit stuff error occured.
CRC
Cyclic redundancy check failed.
FORM
Wrong CRC, ACK delimiter or end of frame occured.
NACK
Acknowledge is missing.
INSufficient
Frame is incomplete.
Usage:
Query only
Protocol Analysis

R&S RTC1000 Specifications

General

Brand	R&S
Model	RTC1000
Category	Test Equipment
Language	English