R&S RTC1000 User Manual

Remote Commands Reference
R&S
®
RTC1000
318User Manual 1335.7352.02 ─ 02
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame (1...n).
<o> Selects the byte number (1...n).
Return values:
<ByteStatus> OK | INS | UART
OK
Byte status is o.k.
INS
Byte status is insufficient.
UART
Error within the byte.
Usage: Query only
BUS<b>:LIN:FRAMe<n>:BYTE<o>:VALue?
Returns the decimal value of the specified byte.
Suffix:
<b>
.
1, 2
Selects the bus.
<n> Selects the frame (1...n).
<o> Selects the byte number (1...n).
Return values:
<ByteValue> Decimal value
Usage: Query only
13.17 Data and File Management
This chapter describes commands that store or restore data and measurement results.
13.17.1 Output Control
HCOPy:DATA?..............................................................................................................319
HCOPy:FORMat............................................................................................................ 319
HCOPy:SIZE:X?............................................................................................................ 319
HCOPy:SIZE:Y?............................................................................................................ 319
HCOPy:DESTination...................................................................................................... 320
MMEMory:NAME........................................................................................................... 320
HCOPy[:IMMediate]....................................................................................................... 320
HCOPy:LANGuage........................................................................................................ 320
Data and File Management

R&S RTC1000 Specifications

General

Brand	R&S
Model	RTC1000
Category	Test Equipment
Language	English