To Next Page

To Previous Page

2.Installation

Settings for @Remote Service (for Printer Models)

 Prepare the necessary equipment and check the following points before you visit the customer

site. For details, ask the @Remote key person.

 For information on how to enter the "Maintenance Mode (SP mode)", contact the supervisor in

your branch office.

 Install the SOM (Smart Organizing Monitor) utility on a PC in advance.

 Make sure that the latest version of the firmware is installed on the machine.

Check Points before Making @Remote Settings

1. Connect a PC and the machine with a crossed wiring LAN cable or a USB cable.

2. Check the IP address of the machine. (When using a USB cable, skip this step.)

3. Check the IP address of the customer engineer's PC.

4. Set an IP address for the customer engineer's PC which is ±1 from the machine's IP address.

(When using a USB cable, skip this step.)

Example:

Machine's IP address: 192.168.000.001

Set the IP address for the PC: 192.168.000.002

5. Start the SOM utility.

6. Click [Connect Printer] in the SOM menu.

7. Select [Connect Printer] in the printer driver selection screen, input the IP address of the machine

Ricoh FAX1120L Field Service Manual

Other manuals for Ricoh FAX1120L