Ricoh GR-C1 User Manual

Controller Options
D117/D118 2-100 SM
2.14.8 CAMERA DIRECT PRINT CARD TYPE K
 Unplug the main machine power cord before you do the following procedure.
1. Remove the SD-card slot cover [A] from the SD card slots (
x 1).
2. Insert the SD card (PictBridge) in SD slot 1 (upper) with its label face [A] to the rear of the
machine.
3. Attach the SD-card slot cover, and then turn on the machine (
x 2).
4. Make sure that the machine can recognize the option (see "Check All Connections" at the end
of this section).

Ricoh GR-C1 Specifications

General

Brand	Ricoh
Model	GR-C1
Category	All in One Printer
Language	English