Main SP Tables-3
D117/D118 3-244 SM Appendix
026 ZnSt:Image Transfer Unit *ENG
Sets the flag for new lubricant for image
transfer unit manual settings.
[0 or 1 / 0 / 1/step]
027 Toner Sub Hopper: K *ENG
Sets the flag for new toner sub hopper
manual settings.
[0 or 1 / 0 / 1/step]
028 Toner Sub Hopper: C *ENG
029 Toner Sub Hopper: M *ENG
030 Toner Sub Hopper: Y *ENG
3710 [HST Concentration Control: Set]
001
Control Method:
Selection
*ENG
Sets the select mode if control is done or
not with HST memory.
[0 or 1 / 1 / 1/step]
0:NotUse, 1:Use
3711 [HST Concentration Control: K]
001 Vcnt *ENG Displays release check value stored in
HST memory.
[0.0 to 5.0 / - / 0.1V/step]
002 Vt *ENG
003 Sensitivity: HL *ENG
Displays release check value stored in
HST memory.
[1.22 to 3.77 / - / 0.01V/step]
004 Sensitivity: HM *ENG Displays release check value stored in
HST memory.
[0.00 to 2.55 / - / 0.01V/step]
005 Sensitivity: ML *ENG
006 Set Detection *ENG Displays release check value stored in
HST memory.
[0.0 to 5.0 / - / 0.1V/step]
007 Without Developer *ENG
To Next Page
Loading...
Need help?
General
