2.2.6 SETTINGS RELEVANT TO THE SERVICE CONTRACT
Change the necessary settings for the following SP modes if the customer has made a service
contract.
 You must select one of the counter methods (developments/prints) in accordance with
the contract (SP5045-001).
Counting method
SP No. Function Default
SP5-045-001
Specifies if the counting method used in
meter charge mode is based on
developments or prints.
NOTE: You can set this one time only. You
cannot change the setting after you have set
it for the first time.
"0": Developments
Service Tel. No. Setting
SP No. Function Default
SP5-812-001
through 004
5812-002 programs the service station fax
number. The number is printed on the
counter list when the meter charge mode is
selected. This lets the user fax the counter
data to the service station.
To Next Page
Need help?
General
