Input Check Table
D117/D118 5-6 SM
5.2 INPUT CHECK TABLE
5.2.1 INPUT CHECK TABLE
When entering the Input Check mode, 8 digits display the result for a section. Each digit
corresponds to a different device as shown in the table.
Bit No. 7 6 5 4 3 2 1 0
Result
0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1 0 or 1
Copier
5803 Description
Reading
0 1
5803-001 Regist Sensor Paper detected Paper not detected
5803-002 Tray Paper End Sensor Paper detected Paper not detected
5803-003 Bypass Paper End Sensor Paper detected Paper not detected
5803-004 Bypass Paper Width Detection Paper detected Paper not detected
5803-005 Tray Lift Motor Position Sensor (Not used)
5803-006 Duplex Exit Sensor Paper detected Paper not detected
5803-007 Exit Sensor Paper detected Paper not detected
5803-008 Duplex Entrance Sensor Paper detected Paper not detected
5803-009 Tray Full Exit Sensor (Not used)
5803-010 Bypass Lift Positon Up Down
5803-011 Tray Exit Sensor Paper detected Paper not detected
5803-012 Interlock Release Detection 1 Door open Door close
5803-013 Interlock Release Detection 2 Door open Door close
To Next Page
Loading...
Need help?
General
