Copy Data Security Unit (D640)
D117/D118 2-46 SM
 The machine will issue an SC165 error if the machine is powered on with the ICIB-3
removed and the "Data Security for Copying" feature set to "ON".
 The machine will issue an uncertain SC165 error if the machine is powered on with
the defective ICIB-3 and the "Data Security for Copying" feature set to "OFF".
 When you remove this option from the machine, first set the setting to "OFF" with the
user tool before removing this board. If you forget to do this, "Data Security for
Copying" feature cannot appear in the user tool setting. And then SC165 will appear
every time the machine is switched on, and the machine cannot be used.
5. Make sure that the machine can recognize the option (see "Check All Connections" at the end
of this section).
To Next Page
Loading...
Need help?
General
