TC35i AT Command Set
5.5 AT^SLCK
s
m
obil
e
TC35i_ATC_V02.07 Page 125 of 439 1/30/04
Confidential / Released
5.5 AT^SLCK Facility lock
AT command AT^SLCK provides the "Facility lock" function as described for AT command AT+CLCK defined in
GSM 07.07.
It is identical in every respect to
AT+CLCK, except that the command syntax and response prefix is "^SLCK"
instead of "+CLCK".
Syntax
Command Description
The Test command returns the supported parameters.
Use this command to lock, unlock or interrogate a network or ME
<facility>. The command can be aborted
when network facilities are being set or interrogated.
Note
• For further details please refer to AT+CLCK.
Test Command
AT^SLCK=?
Response(s)
^SLCK:list of supported <facility>s
OK
Write Command
AT^SLCK=<facility>, <mode>[, <password>][, <class>]
Response(s)
if <mode> is not equal 2 and command successful:
OK
if <mode>= 2 and command successful:
^SLCK: <status>, <class>
[^SLCK: <status>, <class> ]
[^SLCK: ...]
OK
If error is related to ME functionality
+CME ERROR
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
SIEMENS, GSM 07.07, GSM 02.04,
GSM 02.88, GSM 03.88, GSM 04.88
To Next Page
Loading...
Need help?
General
