TC35i AT Command Set
8.6 AT^SMOND
s
m
obil
e
TC35i_ATC_V02.07 Page 194 of 439 1/30/04
Confidential / Released
8.6 AT^SMOND Selective Cell Monitoring
This command can be used to obtain selected cell information.
Syntax
Command Description
The "execute" command can be used to obtain complete cell information once on request. The response format
is identical to the response received for a write command with
<format>= 15. See "Examples" for a sample
output string.
The write command can be used to obtain selected cell information automatically every
<period> seconds.
Output will pause for the specified number of seconds after each output line.
To stop the presentation type "AT" or "at".
The cell or set of cells to be examined and the information to be retrieved can be specified by means of parameter
<format>.
Test Command
AT^SMOND=?
Response(s)
OK
Exec Command
AT^SMOND
Response(s)
^SMOND: [<sci>][, <nci>][, <TA>][, <rssiber>]
OK
CME ERROR
Write Command
AT^SMOND=, <period>[, <format>]
Response(s)
^SMOND: <celldata>
^SMOND: <celldata>
[^SMOND: ...]
OK
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
SIEMENS, 3GPP TS 05.08
To Next Page
Loading...
Need help?
General
