TC35i AT Command Set
13. SIM Application Toolkit (SAT) Commands
s
m
obil
e
TC35i_ATC_V02.07 Page 335 of 439 1/30/04
Confidential / Released
13. SIM Application Toolkit (SAT) Commands
This chapter offers a brief reference of commands and responses related to the TC35i's SIM Application Toolkit
(SAT) implementation. Detailed information is available with the document "Remote-SAT User Guide" [3]. Please
contact the Wireless Modules Application Engineering Department at Siemens AG for details.
ETSI specification GSM 11.14 [19] defines SAT in detail.
SAT allows for the execution of applications provided by a Subsciber Identity Module (SIM). Usually SIM cards
are used for storing GSM network provider and user specific data, e.g. phonebook entries and Short Messages
(SMS). However, a SIM card may also hold a SIM Application.
Since the TC35i has SAT functionality it is able to execute the commands issued by applications implemented
on a network provider specific SIM card.
Two groups of commands are used between the ME and the SIM Application:
• Proactive Commands are issued to the TC35i's SAT from the SIM Application, such as "DISPLAY TEXT".
• Envelope Commands are responded to the SIM Application from the TC35i, such as "MENU SELECTION".
13.1 AT^SSTA SAT Interface Activation
Syntax
Test Command
AT^SSTA=?
Response(s)
^SSTA:(list of supported <state>s), (list of supported <Alphabet>s)
OK
Read Command
AT^SSTA?
Response(s)
^SSTA: <state>, <Alphabet>, <allowedInstance>, <SatProfile>
OK
Write Command
AT^SSTA=<mode>[, <Alphabet>]
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS
To Next Page
Loading...
Need help?
General
