Siemens TC35i Terminal User Manual

TC35i AT Command Set
2.12 AT+CMEE
s
m obil e
TC35i_ATC_V02.07 Page 46 of 439 1/30/04
Confidential / Released
2.12 AT+CMEE Report mobile equipment error
Syntax
Command Description
This command controls the presentation of the result code +CME ERROR: <err> that indicates errors relating to
ME functionality.
When you power down or reset the ME with
AT+CFUN=1,1 the setting will be reset to its default. The levels 1 or
2 need to be selected every time you reboot the ME, or may be included, for permanent use, in the user profile
saved with
AT&W.
Parameter Description
0
(&F)
disable result code (only 'ERROR' will be displayed)
1 enable result code and use numeric values
2 enable result code and use verbose values
Test Command
AT+CMEE=?
Response(s)
+CMEE: (list of supported<n>s)
OK
Read Command
AT+CMEE?
Response(s)
+CMEE: <n>
OK
Write Command
AT+CMEE=<n>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
GSM 07.07
<n>
(num)(&W)(&V)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English