Siemens TC35i Terminal User Manual

TC35i AT Command Set
11.9 AT+CMSS
s
m obil e
TC35i_ATC_V02.07 Page 290 of 439 1/30/04
Confidential / Released
11.9 AT+CMSS Send SMS messages from storage
Syntax
Command Description
The write command sends message with location value <index> from message storage <mem2> to the network
(SMS-SUBMIT or SMS-COMMAND). If new recipient address
<da> is given for SMS-SUBMIT, it shall be used
instead of the one stored with the message. Reference value
<mr> is returned to the TE on successful message
delivery. Value can be used to identify message upon unsolicited delivery status report result code.
If the optional parameter
<da> is given, the old status of the short message at <index> remains unchanged
(see
<stat>).
Test Command
AT+CMSS=?
Response(s)
OK
Write Command
If text mode (AT+CMGF=1):
AT+CMSS=<index> [, <da>[, <toda>]]
Response(s)
+CMSS: <mr>[, <scts>]
OK
If sending fails
ERROR
+CMS ERROR
Write Command
If PDU mode (AT+CMGF=0):
AT+CMSS=<index> [, <da>[, <toda>]]
Response(s)
+CMSS: <mr>[, <ackpdu>]
OK
If sending fails
ERROR
+CMS ERROR
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
GSM 07.05

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English