Siemens TC35i Terminal User Manual

TC35i AT Command Set
11.1 SMS parameters
s
m obil e
TC35i_ATC_V02.07 Page 277 of 439 1/30/04
Confidential / Released
Recipient Address
GSM 03.40 TP-Recipient-Address Address-Value field in string format; BCD numbers (or GSM default alphabet
characters) are converted to characters of the currently selected TE character set (refer to command
AT+CSCS.); type of address given by <tora>
Reference number to identify all segments of the concatenated SMS (i.e. the number needs to be the same for
each segment). If
<ieia>=8 then max=255, otherwise 65535.
0...255
0...65535
Service Center Address
GSM 04.11 RP SC address Address-Value field in string format; BCD numbers (or GSM default alphabet char-
acters) are converted to characters of the currently selected TE character set (refer to command
AT+CSCS); type
of address given by
<tosca>
Service Centre Time Stamp
GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format (refer
<dt>)
Sequence number of the concatenated SMS beginning with 1. The number must be incremented by one for
each segment of the concatenated short message.
<seq>=0 means: ignore the value. This will result in a non-concatenated SMS.
0...255
Serial Number
GSM 03.41 CBM Serial Number in integer format
Status
GSM 03.40 TP-Status in integer format
0...255
Message status
3GPP 27.005 Interface of SMS and CB. Indicates the status of message in memory.
<ra>
(num)(+CSCS)
<ref>
(num)
<sca>
(num)(+CSCS)
<scts>
(num)
<seq>
(num)
<sn>
(num)
<st>
(num)
<stat>
(str)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English