TC35i AT Command Set
15.9 AT^SNFA
s
m
obil
e
TC35i_ATC_V02.07 Page 375 of 439 1/30/04
Confidential / Released
15.9 AT^SNFA Set or query of microphone attenuation
Syntax
Command Description
The test command returns the supported values of the parameter <atten>.
The read command returns the current attenuation value on the microphone path for the current audio device
(selected by
AT^SNFS).
Write command controls the large-scale attenuation on the microphone path for the current audio device
(selected by
AT^SNFS) with the following restrictions:
• It is not allowed for audio device 1
• As long as the microphone is muted, the write command is temporarily disabled
• Setting of value 0 is not allowed (use
AT^SNFM=0 for this).
• For values greater than 32767, 32767 will be used.
Test Command
AT^SNFA=?
Response(s)
^SNFA: (list of supported <atten>s)
OK
Read Command
AT^SNFA?
Response(s)
^SNFA: <atten>
OK
Write Command
AT^SNFA=<atten>
Response(s)
OK
ERROR
CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS
To Next Page
Loading...
Need help?
General
