Siemens TC35i Terminal User Manual

TC35i AT Command Set
1.3 Document conventions
s
m obil e
TC35i_ATC_V02.07 Page 15 of 439 1/30/04
Confidential / Released
1.3.2 Superscript notation for parameters and values
Table 1.2: Symbols used to indicate the correlations with other commands
Table 1.3: Symbols used to mark different types of default values of parameters
Parameter option Meaning
<param>
(&W)
Parameter value will be stored with AT&W
<param>
(&V)
Parameter value will be displayed with AT&V
<param>
(ˆSNFW)
Parameter value will be stored with AT^SNFW
<param>
(+CSCS)
Parameter value has to be (is) coded according to current setting of <chset> (see
AT+CSCS for details)
Value option Meaning
[x] Default value: if the parameter is omitted, the value 'x' will be assumed
x
(&F)
Factory default value, will be restored to 'x' with AT&F
x
(P)
Powerup default value of a parameter which is not stored at power down
x
(D)
Delivery default value of a parameter which cannot be restored automatically

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English