Siemens TC35i Terminal User Manual

TC35i AT Command Set
9.11 AT+CPUC
s
m obil e
TC35i_ATC_V02.07 Page 237 of 439 1/30/04
Confidential / Released
9.11 AT+CPUC Price per unit and currency table
Syntax
Command Description
Read command returns the current parameters of PUC.
Write command sets the parameters of Advice of Charge related price per unit and currency table. SIM PIN2 is
usually required to set the parameters.
Parameter Description
Three-character currency code (e.g. "GBP", "EUR"). If the currency name is longer than three characters, all
characters will be cut off after the third position. Before they are written to the SIM Card, these characters are
converted to the standard GSM alphabet.
Test Command
AT+CPUC=?
Response(s)
OK
Read Command
AT+CPUC?
Response(s)
+CPUC: <currency>, <ppu>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CPUC=<currency>, <ppu>[, <passwd>]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
GSM 07.07
<currency>
(str)(+CSCS)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English