TC35i AT Command Set
10.26 AT+FTM
s
m
obil
e
TC35i_ATC_V02.07 Page 271 of 439 1/30/04
Confidential / Released
10.26 AT+FTM Transmit Data
Syntax
Command Description
This command causes the TA to transmit data using the modulation mode defined below. An ERROR response
code results if this command is issued while the modem is on-hook.
Notes
• Used for Fax Class 1 only
•
<mod>= 3 is not possible
Test Command
AT+FTM=?
Response(s)
(list of <mod>s)
OK
Write Command
AT+FTM=<mod>
Response(s)
CONNECT
If error is related to ME functionality
ERROR
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
TIA/EIA-578
To Next Page
Loading...
Need help?
General
