Siemens TC35i Terminal User Manual

TC35i AT Command Set
3.4 AT+CEER
s
m obil e
TC35i_ATC_V02.07 Page 71 of 439 1/30/04
Confidential / Released
3.4 AT+CEER Extended error report
Syntax
Command Description
TA returns an extended error report of the reason for the last
•call release
• failure to set up a call (both mobile originated or terminated)
• failure to modify a call by using Supplementary Services
• failed attempt to activate, register, query, deactivate or deregister a Supplementary Service
The release cause report is presented in numeric format. A description associated with each number can be
found in the tables given in the following subclauses. The first parameter
<locationID> serves to locate the
other two parameters. Depending on the failure or release cause either
<reason> or <ssRelease> are appli-
cable.
Parameter Description
Location ID as number code. Location IDs are listed in subclause 3.4.1. Each ID is related with another table
that contains a list of
<reason>s or <ssRelease>s.
Reason for last call release as number code. The number codes are listed in several tables, sorted by different
categories in the following subclauses. The tables can be found proceeding from the Location ID given in sub-
clause 3.4.1.
Test Command
AT+CEER=?
Response(s)
OK
Exec Command
AT+CEER
Response(s)
+CEER: <locationID>, <reason>, <ssRelease>
OK
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
GSM 07.07
<locationID>
(num)
<reason>
(num)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English