Siemens TC35i Terminal User Manual

TC35i AT Command Set
4.7 AT+ICF
s
m obil e
TC35i_ATC_V02.07 Page 94 of 439 1/30/04
Confidential / Released
4.7 AT+ICF Serial Interface Character Framing
The command AT+ICF can be used to set or query the character framing.
Syntax
Command Description
The test command returns the values of the supported character framings.
The read command returns the currently selected character framing.
The write command determines the serial interface character framing format and parity used for receiving and
transmitting.
Parameter Description
Specifies the character format used for receiving and transmitting.
1 8 data 0 parity 2 stop
Test Command
AT+ICF=?
Response(s)
+ICF: (list of supported <format>s), (list of supported <parity>s)
OK
Read Command
AT+ICF?
Response(s)
+ICF: <format>[, <parity>]
OK
Write Command
AT+ICF=[<format>][, <parity>]
Response(s)
OK
ERROR
PIN ASC0 MUX1 MUX2 MUX3
! % § § §
Reference(s)
V.25ter
<format>
(num)(&W)(&V)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English