Siemens TC35i Terminal User Manual

TC35i AT Command Set
10.6 AT+FCLASS
s
m obil e
TC35i_ATC_V02.07 Page 250 of 439 1/30/04
Confidential / Released
10.6 AT+FCLASS Fax: Select, read or test service class
Syntax
Command Description
The ME is set to a particular mode of operation (data, fax). This causes the MA to process information in a man-
ner suitable for that type of information.
Parameter Description
[0]
(&F)
data (e.g. EIA/TIA-602 or ITU V.25ter)
1 Fax class 1 (EIA/TIA-578-A, Service Class 1)
2 Fax class 2 (EIA/TIA SP-2388, an early draft version of EIA/TIA-592-A - Ser-
vice class 2.1)
Notes
• Using Error Correcting Mode (ECM) when sending FAXes over GSM should be avoided
Test Command
AT+FCLASS=?
Response(s)
(list of supported <n>s)
OK
Read Command
AT+FCLASS?
Response(s)
<n>
OK
Write Command
AT+FCLASS=<n>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
EIA/TIA-592-A
<n>
(num)(&W)(&V)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English