Siemens TC35i Terminal User Manual

TC35i AT Command Set
7.22 AT+CLCC
s
m obil e
TC35i_ATC_V02.07 Page 171 of 439 1/30/04
Confidential / Released
7.22 AT+CLCC List current calls of ME
Syntax
Command Description
The exec command returns a list of current calls of ME. If command is successful, but no calls are available, no
information response is sent to TE.
Parameter Description
call identification number as described in GSM02.30 subclause 4.5.5.1; this number can be used in AT+CHLD
command operations
0 mobile originated call (MOC)
1 mobile terminated call (MTC)
state of the call
0active
Test Command
AT+CLCC=?
Response(s)
OK
Exec Command
AT+CLCC
Response(s)
[+CLCC: <idx>, <dir>, <stat>, <mode>, <mpty>[, <number>, <type>[, <alpha>]] ]
[+CLCC: <idx>, <dir>, <stat>, <mode>, <mpty>[, <number>, <type>[, <alpha>]] ]
[+CLCC: ...]
OK
ERROR
+CME ERROR
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
GSM 07.07
<idx>
(num)
<dir>
(num)
<stat>
(num)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English