TC35i AT Command Set
10.10 AT+FDFFC
s
m
obil
e
TC35i_ATC_V02.07 Page 255 of 439 1/30/04
Confidential / Released
10.10 AT+FDFFC Data Compression Format Conversion
Syntax
Command Description
This parameter determines the ME response to a mismatch between the data format negotiated for the fax ses-
sion, reported by the
<df> subparameter, and the Phase C data desired by the controlling application, indicated
by the optional
AT+FDT <df> subparameter, or the AT+FDIS <df> subparameter for AT+FDR operation.
Parameter Description
[0] Mismatch checking is always disabled. The controlling application has to check
the
<df> subparameter and transfer matching data.
Notes
• For further information see AT+FDIS.
• Used for Fax Class 2 only.
Test Command
AT+FDFFC=?
Response(s)
(list of <df>s)
OK
Read Command
AT+FDFFC?
Response(s)
<df>
OK
Write Command
AT+FDFFC=<df>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
EIA PN-2388
<df>
(num)
To Next Page
Loading...
Need help?
General
