Siemens TC35i Terminal User Manual

TC35i AT Command Set
15.16 AT^SNFV
s
m obil e
TC35i_ATC_V02.07 Page 389 of 439 1/30/04
Confidential / Released
15.16 AT^SNFV Set loudspeaker volume
Syntax
Command Description
The test command returns the supported values of the parameter <outStep>.
The read command returns the current value of parameter
<outStep>.
The write command can be used to set the volume of the loudspeaker to the value
<outCalibrate> addressed
by
<outStep>.
Parameter Description
The actual volume of each step is defined by the parameter <outCalibrate>, which can be set with AT^SNFO.
0...4
(P)
Test Command
AT^SNFV=?
Response(s)
^SNFV: (list of supported <outStep>s)
OK
Read Command
AT^SNFV?
Response(s)
^SNFV: <outStep>
OK
Write Command
AT^SNFV=<outStep>
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS
<outStep>
(num)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English