Siemens TC35i Terminal User Manual

TC35i AT Command Set
15.13 AT^SNFO
s
m obil e
TC35i_ATC_V02.07 Page 382 of 439 1/30/04
Confidential / Released
15.13 AT^SNFO Set audio output (= loudspeaker path) parameter
Syntax
Command Description
TA sets earpiece path amplifying.
Parameter Description
Negative DAC gain (attenuation) adjustable in four 6 dB steps from 0 dB to -18 dB (0=0 dB, 3=-18 dB)
0...3
Test Command
AT^SNFO=?
Response(s)
^SNFO: (list of supported <outBbcGain>s) (list of supported <outCalibrate>s) (list of supported
<outStep>s) (list of supported <sideTone>s)
OK
Read Command
AT^SNFO?
Response(s)
^SNFO: <outBbcGain>, <outCalibrate>[0] , <outCalibrate>[1] , <outCalibrate>[2] ,
<outCalibrate>[3] , <outCalibrate>[4] , <outStep>, <sideTone>
OK
Write Command
AT^SNFO=<outBbcGain>, <outCalibrate>[0] , <outCalibrate>[1] , <outCalibrate>[2] ,
<outCalibrate>[3] , <outCalibrate>[4] , <outStep>, <sideTone>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS
<outBbcGain>
(num)(^SNFW)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English