530
Control Panel
Maintenance
Replacing Keytop Labels
When changing a button assignment, you can change the
display label using the keytop replacement tool supplied
with the control panel. For details, refer to the ICP-X7000
Installation Manual or ICP-X1224/X1124/X1216/X1116
Installation Manual.
Cleaning the Control Panel
Wipe gently using a soft, dry cloth to remove dirt from the
control panel body, switches, fader lever, and other
components.
Wipe using a cloth moistened with water or lukewarm
wat
e
r to remove stubborn dirt and stains.
• Squeeze the cloth thoroughly before use to ensure that
no
wate
r droplets can enter the panel. The unit may
become damaged if water droplets enter the unit.
• Do not use cleaning agents, solvents, or detergents.
• Vigorous rubbing may scratch the unit.
About LCD buttons
If you have any concerns about dust or other matter on the
L
C
D buttons in the following control blocks, contact your
Sony service representative.
• Cross-point pad in the cross-point control block/AUX
bu
s cont
rol block
• Flexi Pad control block
• Utility/shotbox control block
• Utility control block
Notes
To Next Page
Loading...
Need help?
General
