Sym Mio 50 User Manual

12. Body Cover
12-8
Front Inner Cover
Removal
Remove the front cover and the front under
spoiler.
Remove the main switch cap. (1 screw)
Remove the rear mounting screw (1 screw) of the
inner cover.
Remove winker relay and meter control unit.
Pry out all wire clamps and then take out the front
inner cover.
Installation
Install the front inner cover according to the
reverse procedure of removal.
1 screw
1 screw
Meter control unit
Winker relay
To this chapter contents

Sym Mio 50 Specifications

General

Brand	Sym
Model	Mio 50
Category	Scooter
Language	English