3. Lubrication System
3-3
Engine OIL
Turn off engine, and park the motorcycle in flat
surface with main stand.
Check oil level with oil dipstick
Do not screw the dipstick into engine as checking.
If oil level is nearly low level, fill out recommended
oil to upper level.
Oil Replacement
Caution
z Drain oil as engine warmed up so that make
sure oil can be drained smoothly and
completely.
Place an oil pan under the motorcycle, and
remove oil strainer cap.
Make sure if the aluminum washer of the draining
bolt is damaged. If so, replace it with new one.
Install the drain bolt and tighten it.
Torque value: 3.5~4.5kgf-m
Engine oil replacement quantity:
HU10U/W 650c.c.
HU05U 700c.c.
Draining bolt
To this chapter contents
To Next Page
Loading...
Need help?
General
