Toyota 2002 Camry User Manual

140HU–01
A61987
A60067
–ENGINE MECHANICAL CYLINDER HEAD GASKET (2AZ–FE)
14–95
1619Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
CYLINDER HEAD GASKET (2AZ–FE)
REPLACEMENT
1. WORK FOR PREVENTING GASOLINE FROM SPILLING OUT (See page 11–1)
2. REMOVE FRONT SUSPENSION UPPER BRACE CENTER(W/ FRONT SUSPENSION BRACE
UPPER CENTER)
3. REMOVE CHAIN SUB–ASSY
(See page 14–74)
4. DRAIN COOLANT (See page 16–6)
5. DISCONNECT RADIATOR HOSE OUTLET
6. DISCONNECT UNION TO CONNECTOR TUBE HOSE
7. DISCONNECT HEATER INLET WATER HOSE
8. DISCONNECT FUEL TUBE SUB–ASSY
(See page 11–1)
9. REMOVE INTAKE MANIFOLD
(a) Disconnect the 2 water by–pass hoses of the throttle
body.
(b) Remove the 5 bolts, 2 nuts, intake manifold and gasket.
10. DISCONNECT ENGINE WIRE
11. REMOVE INTAKE MANIFOLD INSULATOR NO.1
12. REMOVE EXHAUST MANIFOLD HEAT INSULATOR NO.1
13. REMOVE EXHAUST MANIFOLD CONVERTER
SUB–ASSY
(a) Remove the 3 bolts, 2 nuts No.1 and No.2 exhaust man-
ifold stay.

Toyota 2002 Camry Specifications

General

Brand	Toyota
Model	2002 Camry
Category	Automobile
Language	English