6007D–01
H41101
H41102
H41395
H41639
Contact
Plate
Contact
Plate
H41397
–SUPPLEMENTAL RESTRAINT SYSTEM SUPPLEMENTAL RESTRAINT SYSTEM
60–9
2392Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
ON–VEHICLE INSPECTION
1. HORN BUTTON ASSY (VEHICLES NOT INVOLVED IN
COLLISION)
(a) Do a diagnostic system check (See page 05–690).
(b) Do a visual check which includes the following item with
the horn button assy (with airbag) installed in the vehicle.
Check cuts, minute cracks or marked discoloration on the
horn button assy top surface and in the grooved portion.
2. HORN BUTTON ASSY(VEHICLE INVOLVED IN COLLI-
SION AND AIRBAG IS NOT DEPLOYED)
(a) Do a diagnostic system check (See page 05–690).
(b) Do a visual check which includes the following items with
the horn button assy (with airbag) removed from the ve-
hicle.
Check cuts, minute cracks or marked discoloration
on the horn button assy top surface and in the
grooved portion.
Check cuts and cracks in wire harness, and chip-
ping in connectors.
Check the deformation on the steering wheel.
Check the deformation on the horn button contact
plate of the horn button assy.
HINT:
If the horn button contact plate of the horn button assy is
deformed, never repair it. Always replace the horn button
assy with a new one.
There should be no interference between the horn button
assy and steering wheel, and the clearance should be
uniform all the way around when the new horn button
assy is installed on the steering wheel.
CAUTION:
For removal and installation of the horn button assy, see
page 60–15, and be sure to follow the correct procedure.