Toyota 2002 Camry User Manual

1
2
3
4
10
9
8
5
6
7
A53060
A00976
90
Engine
Front
Paint Mark
A53074
A32664
123
Bearing Cap No. 1
4
5
Bearing Cap No. 3
A52475
14–98
–ENGINE MECHANICAL CYLINDER HEAD GASKET (2AZ–FE)
1622Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(c) Using a 10 mm bi–hexagon wrench, install and uniformly
tighten the 10 cylinder head bolts and plate washers, in
several passes, in the sequence shown.
Torque: 79 N⋅m (806 kgf⋅cm, 58 ft⋅lbf)
(d) Mark the front side of the cylinder head bolt with paint.
(e) Retighten the cylinder head bolts by 90 in the sequence
shown.
(f) Check that the paint mark is now at a 90 angle to the
front.
23. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSY
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)
24. INSTALL CAMSHAFT BEARING NO.2
25. INSTALL CAMSHAFT
(a) Tighten the camshaft bearing cap No.1 and No.3 as the
sequence shown in the illustration.
Torque:
Bearing cap No.1 30 N⋅m (301 kgf⋅cm, 22 ft⋅lbf)
Bearing cap No.3 9.0 N⋅m (92 kgf⋅cm, 80 in.⋅lbf)

Toyota 2002 Camry Specifications

General

Brand	Toyota
Model	2002 Camry
Category	Automobile
Language	English