V00012
Shape (Example)
Removal/Installation
Removal
Installation
Removal Installation
D25063
CORRECTWRONG
D25064
01–8
–INTRODUCTION REPAIR INSTRUCTION
8Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
(h) REMOVAL AND INSTALLATION OF VACUUM HOSES
(1) To disconnect vacuum hoses, pull them by holding
the end, not the middle of the hose.
(2) When disconnecting vacuum hoses, use tags to
identify where they should be reconnected.
(3) After completing the job, make a double check
whether the vacuum hoses are properly connected.
A label under the hood shows the proper layout.
(4) When using a vacuum gauge, never force the hose
onto a connector that is too large. Use a step–down
adapter for adjustment. Once the hose has been
stretched, it may leak air.
To Next Page
Loading...
Need help?
General
