5002T–01
C92272
C92270
4 Spoke
Steering Wheel
Lock Part
3 Spoke
Steering Wheel
Pull Out
50–22
–STEERING COLUMN STEERING COLUMN ASSY (TMMK MADE)
2257Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
STEERING COLUMN ASSY (TMMK MADE)
OVERHAUL
1. PRECAUTION(See page 50–1)
2. SEPARATE BATTERY NEGATIVE TERMINAL
3. REMOVE STEERING WHEEL COVER LOWER NO.2
(See page 50–6)
4. REMOVE STEERING WHEEL COVER LOWER NO.3(W/O STEERING PAD SWITCH 4 SPOKE
STEERING WHEEL)
(See page 50–6)
5. REMOVE CONNECTOR COVER(W/ STEERING PAD SWITCH 4 SPOKE STEERING WHEEL)
(See page 50–6)
6. REMOVE STEERING WHEEL COVER LOWER NO.3(3 SPOKE STEERING WHEEL ASSY)
(See page 50–6)
7. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
8. REMOVE HORN BUTTON ASSY
NOTICE:
If the airbag connector is disconnected with the ignition
switch at ON, DTCs will be recorded.
(a) Using a torx socket wrench, loosen the 2 torx screws until
the groove along the screw circumference catches on the
screw case.
(b) Pull out the horn button assy from the steering wheel.
(c) Using a scrwdriver, release the lock part of each airbag
connector and disconnect the 2 airbag connectors.
(d) Disconnect the horn connector. (4 Spoke steering wheel)
NOTICE:
When removing the horn button assy, take care not to pull
the airbag wire harness.
To Next Page
Loading...
Need help?
General
