11024–02
Fuel Tube Connector
A50710
Fuel Tube Connector
SST
(Hose)
B12947
SST (Hose)
SST
(Clamp)
Vinyl Tube
SST (Union)
O–Ring
A51875
11–8
–FUEL FUEL SYSTEM (2AZ–FE)
1452Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
INSPECTION
1. FUEL INJECTOR ASSY
(a) Inspect injector resistance
(1) Using an ohmmeter, measure the resistance be-
tween the terminals.
Resistance: 13.4 – 14.2
Ω at 20C (68F)
If the resistance is not as specified, replace the injector.
(b) Inspect injector inspection
CAUTION:
Keep injector clear of sparks during the test.
(1) Purchase the new fuel tube and take out the fuel
tube connector from its pipe.
HINT:
Part No. 23901–28130
(2) Connect SST and fuel tube connector to the fuel
pipe.
SST 09268–41047 (90467–13001, 95336–08070)
CAUTION:
Perform connecting operations of the fuel tube connector
(quick type) after observing the precautions.
(3) Install the O–ring to the injector.
(4) Connect SST (union and hose) to the injector, and
hold the injector and union with SST (clamp)
SST 09268–41047 (09268–41110, 09268–41300,
90467–13001, 95336–08070)
(5) Put the injector into a graduated cylinder.
HINT:
Install a suitable vinyl tube onto the injector to prevent gasoline
from splashing out.
(6) Operate the fuel pump.(See Page 11–5)
To Next Page
Loading...
Need help?
General
