2601F–02
F40136
F40137
C65925
C93871
–FRONT SUSPENSION FRONT SHOCK ABSORBER WITH COIL SPRING
26–9
1921Author: Date:
2002 CAMRY REPAIR MANUAL (RM881U)
FRONT SHOCK ABSORBER WITH COIL SPRING
OVERHAUL
HINT:
COMPONENTS: See page 26–3
1. REMOVE FRONT WHEEL
2. DISCONNECT FRONT STABILIZER LINK ASSY LH
(a) Remove the nut and disconnect the front stabilizer link
assy LH from the shock absorber assy front LH.
HINT:
If the ball joint turns together with the nut, use a hexagon (6 mm)
wrench to hold the stud.
3. REMOVE FRONT SHOCK ABSORBER WITH COIL
SPRING
(a) Loosen the lock nut.
NOTICE:
Do not loosen except for the case with disassembling
the shock absorber assy front LH with coil spring.
Do not remove the lock nut.
(b) w/ ABS:
Remove the bolt, disconnect the front flexible hose No. 1
and speed sensor front LH.
(c) w/o ABS:
Remove the bolt, disconnect the front flexible hose No. 1.
(d) Remove the 2 nuts and 2 bolts on the lower side of front
shock absorber with coil spring.
NOTICE:
When removing bolt, stop the bolt from rotating and loosen
the nut.