Toyota 22R-E User Manual

6. INSTALL CRANKSHAFT TIMING PULLEY
(See step 6 on page EG2–42)
7. INSTALL TIMING BELT
(See page EG2–41)
8. (4WD)
INSTALL FRONT DIFFERENTIAL
(See page SA–106)
9. ENGINE UNDER COVER
10. FILL WITH ENGINE OIL
11. START ENGINE AND CHECK FOR LEAKS
12. RECHECK ENGINE OIL LEVEL
–ENGINE LUBRICATION SYSTEM
EG2–287

Toyota 22R-E Specifications

General

Displacement	2.4 L (2366 cc)
Fuel System	Electronic Fuel Injection (EFI)
Compression Ratio	9.0:1
Torque	142 lb⋅ft (193 N⋅m) at 3, 400 rpm
Block Material	Cast Iron
Head Material	Aluminum
Engine Type	Inline-4
Bore x Stroke	92 mm x 89 mm (3.62 in x 3.50 in)
Valvetrain	SOHC, 2 valves per cylinder
Power Output	112 hp (84 kW) at 4, 600 rpm