Vertiv Liebert iCOM User Manual

4 Managing Events: Alarms,WarningsandMessages
Events are notifications of operating status for the cooling unit, its components, and auxiliary devices. All events are recorded
in the Event Log, and alarm and warning events are also displayed on the Alarms panel (See Viewing the Event Log on
page20 , and Viewing Unit Alarms on page17 .)
In some cases, depending on configuration, an alarm event may power off the cooling unit, but not always. However, if a
standby unit is configured, all alarm events stop the faulty unit and start the standby unit. Message and warning events do not.
4.1 Event Properties
The ALARMS & EVENTS panel lists all events available on the system. You can view and modify events and the criteria that
trigger visual/audible alarms including:
• Critical thresholds
• Time delays
• Enable/disable
• Event type
• Adding custom events
NOTE: Not all event properties may be adjusted, depending on the criticality of the event, whichisfactory set.
To open the panel:
Touch , then > Alarm/Event Setup.
NOTE: Depending on the type of thermal management unit, included components, and control settings of your system,
all of the options listed may not be available on your Vertiv™ Liebert® iCOM™ display.
4.1.1 Alarms and Events Panel Fields
Property
Lists groups of events, expanding displays the events in each group. See Enabling Events and EditingEventSettings
on the next page .
Type
Event type. See Selecting Event Type and SettingAlarm/WarningNotification on page83 .
4 Managing Events: Alarms,WarningsandMessages
81
Vertiv™ Liebert® iCOM™Installer/User Guide

Vertiv Liebert iCOM Specifications

General

Brand	Vertiv
Model	Liebert iCOM
Category	Control Unit
Language	English