– Turn wiper blade -1- on wiper arm onto limit stop -arrow A-.
– Pull wiper blade -1- off axis of wiper arm -arrow B-.
Installing:
– Slide wiper blade onto axis of wiper arm.
– Turn wiper blade on axis of wiper arm onto stop.
– Carefully fold wiper arm back down onto windscreen.
1.6 Removing and installing rain and light
detector sensor -G397-
Removing:
Special tools and workshop equipment required
♦ Removal wedge -3409-
– Switch off ignition and all electrical consumers and pull out
ignition key.
– Remove interior mirror ⇒ General body repairs, interior; Rep.
Gr. 68 ; Removing and installing interior mirror .
– Pull connector -1- off rain and light detector sensor -G397-
-2-.
Jetta 2005 ➤ , Bora 2006 ➤
Electrical System - Edition 05.2005
1. Windscreen wiper system 163